Pulleys of conveyors shall not be cleaned manually while the conveyor is in motion.
56.11014 Crossing moving conveyors
Moving conveyors shall be crossed only at designated crossover points.
56.11013 Conveyor crossovers
Crossovers shall be provided where it is necessary to cross conveyors.
56.11016 Snow and ice on walkways and travelways
Regularly used walkways and travelways shall be sanded, salted, or cleared of snow and ice as soon as practicable.
56.14205 Machinery, equipment, and tools
Machinery, equipment, and tools shall not be used beyond the design capacity intended by the manufacturer where such use may create a hazard to persons.
56.14130 (e)(2) Roll-over protective structures (ROPS) and seat belts
Alterations or repairs on ROPS shall be performed only with approval from the ROPS manufacturer or under the instructions of a registered professional engineer with knowledge and experience in ROPS design. The manufacturer or engineer shall certify that the ROPS meets the applicable performance requirements.
56.14130 (g) Roll-over protective structures (ROPS) and seat belts
Wearing seat belts. Seat belts shall be worn by the equipment operator except that when operating graders from a standing position, the grader operator shall wear safety lines and a harness in place of a seat belt.
56.14130 (a) Roll-over protective structures (ROPS) and seat belts
(a) Equipment included. Roll-over protective structures (ROPS) and seat belts shall be installed on— (1) Crawler tractors and crawler loaders; (2) Graders; (3) Wheel loaders and wheel tractors; (4) The tractor portion of semi-mounted scrapers, dumpers, water wagons, bottom-dump wagons, rear-dump wagons, and towed fifth wheel attachments; (5) Skid-steer loaders; and (6) Agricultural tractors.
56.14132 Horns and backup alarms
(a) Manually-operated horns or other audible warning devices provided on self-propelled mobile equipment as a safety feature shall be maintained in functional condition. (b)(1) When the operator has an obstructed view to the rear, self-propelled mobile equipment shall have— (i) An automatic reverse-activated signal alarm; (ii) A wheel-mounted bell alarm which sounds at least once …
56.14200 Warnings prior to starting or moving equipment
Before starting crushers or moving self-propelled mobile equipment, equipment operators shall sound a warning that is audible above the surrounding noise level or use other effective means to warn all persons who could be exposed to a hazard from the equipment.